document number: 94395 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 11-aug-08 1 phase control thyristors (hockey puk version), 1745 a st1230c..kp series vishay high power products features ? center amplifying gate ? metal case with ceramic insulator ? international standard case a-24 (k-puk) ? high profile hockey puk ? lead (pb)-free ? designed and qualified for industrial level typical applications ? dc motor controls ? controlled dc power supplies ? ac controllers electrical specifications product summary i t(av) 1745 a a-24 (k-puk) rohs compliant major ratings and characteristics parameter test conditions values units i t(av) 1745 a t hs 55 c i t(rms) 3200 a t hs 25 c i tsm 50 hz 33 500 a 60 hz 35 100 i 2 t 50 hz 5615 ka 2 s 60 hz 5126 v drm /v rrm 800 to 1600 v t q typical 200 s t j - 40 to 125 c voltage ratings type number voltage code v drm /v rrm , maximum repetitive peak and off-state voltage v v rsm , maximum non-repetitive peak voltage v i drm /i rrm maximum at t j = t j maximum ma st1230c..k 08 800 900 100 12 1200 1300 14 1400 1500 16 1600 1700
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 94395 2 revision: 11-aug-08 st1230c..kp series vishay high power products phase control thyristors (hockey puk version), 1745 a absolute maximum ratings parameter symbol test conditions values units maximum average on-state current at heatsink temperature i t(av) 180 conduction, half sine wave double side (single side) cooled 1745 (700) a 55 (85) c maximum rms on-state current i t(rms) dc at 25 c heatsink temperature double side cooled 3200 a maximum peak, one-cycle non-repetitive surge current i tsm t = 10 ms no voltage reapplied sinusoidal half wave, initial t j = t j maximum 33 500 t = 8.3 ms 35 100 t = 10 ms 100 % v rrm reapplied 28 200 t = 8.3 ms 29 500 maximum i 2 t for fusing i 2 t t = 10 ms no voltage reapplied 5615 ka 2 s t = 8.3 ms 5126 t = 10 ms 100 % v rrm reapplied 3971 t = 8.3 ms 3625 maximum i 2 t for fusing i 2 t t = 0.1 to 10 ms, no voltage reapplied 56 150 ka 2 s low level value of threshold voltage v t(to)1 (16.7 % x x i t(av) < i < x i t(av) ), t j = t j maximum 0.93 v high level value of threshold voltage v t(to)2 (i > x i t(av) ), t j = t j maximum 1.02 low level value of on-state slope resistance r t1 (16.7 % x x i t(av) < i < x i t(av) ), t j = t j maximum 0.17 m high level value of on-s tate slope resistance r t2 (i > x i t(av) ), t j = t j maximum 0.16 maximum on-state voltage v tm i pk = 4000 a, t j = t j maximum, t p = 10 ms sine pulse 1.62 v maximum holding current i h t j = 25 c, anode supply 12 v resistive load 600 ma typical latching current i l 1000 switching parameter symbol test conditions values units maximum non-repetitive rate of rise of turned-on current di/dt gate drive 20 v, 20 , t r 1 s t j = t j maximum, anode voltage 80 % v drm 1000 a/s typical delay time t d gate current 1 a, di g /dt = 1 a/s v d = 0.67 % v drm , t j = 25 c 1.9 s typical turn-off time t q i tm = 550 a, t j = t j maximum, di/dt = 40 a/s, v r = 50 v, dv/dt = 20 v/s, gate 0 v 100 , t p = 500 s 200 blocking parameter symbol test conditions values units maximum critical rate of rise of off-state voltage dv/dt t j = t j maximum linear to 80 % rated v drm 500 v/s maximum peak reverse and off-state leakage current i rrm , i drm t j = t j maximum, rated v drm /v rrm applied 100 ma
document number: 94395 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 11-aug-08 3 st1230c..kp series phase control thyristors (hockey puk version), 1745 a vishay high power products note ? the table above shows the increment of thermal resistance r thjc when devices operate at di fferent conduction angles than dc triggering parameter symbol test conditions values units typ. max. maximum peak gate power p gm t j = t j maximum, t p 5 ms 16 w maximum average gate power p g(av) t j = t j maximum, f = 50 hz, d% = 50 3 maximum peak positive gate current i gm t j = t j maximum, t p 5 ms 3.0 a maximum peak positive gate voltage + v gm 20 v maximum peak negative gate voltage - v gm 5.0 dc gate current required to trigger i gt t j = - 40 c maximum required gate trigger/ current/voltage are the lowest value which will trigger all units 12 v anode to cathode applied 200 - ma t j = 25 c 100 200 t j = 125 c 50 - dc gate voltage required to trigger v gt t j = - 40 c 1.4 - v t j = 25 c 1.1 3.0 t j = 125 c 0.9 - dc gate current not to trigger i gd t j = t j maximum maximum gate current/ voltage not to trigger is the maximum value which will not trigger any unit with rated v drm anode to cathode applied 10 ma dc gate voltage not to trigger v gd 0.25 v thermal and mechanical specifications parameter symbol test conditions values units maximum operating junction temperature range t j - 40 to 125 c maximum storage temperature range t stg - 40 to 150 maximum thermal resistance, junction to heatsink r thj-hs dc operation single side cooled 0.042 k/w dc operation double side cooled 0.021 maximum thermal resistance, case to heatsink r thc-hs dc operation single side cooled 0.006 dc operation double side cooled 0.003 mounting force, 10 % 24 500 (2500) n (kg) approximate weight 425 g case style see dimensions - link at the end of datasheet a-24 (k-puk) r thjc conduction conduction angle sinusoidal conduction rectangular conduction test conditions units single side double side single side double side 180 0.003 0.003 0.002 0.002 t j = t j maximum k/w 120 0.004 0.004 0.004 0.004 90 0.005 0.005 0.005 0.005 60 0.007 0.007 0.007 0.007 30 0.012 0.012 0.012 0.012
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 94395 4 revision: 11-aug-08 st1230c..kp series vishay high power products phase control thyristors (hockey puk version), 1745 a fig. 1 - current ratings characteristics fig. 2 - current ratings characteristics fig. 3 - current ratings characteristics fig. 4 - current ratings characteristics fig. 5 - on-state power loss characteristics fig. 6 - on-state power loss characteristics average on-state current (a) maximum allowable heatsink temperature (c) 40 50 60 70 80 90 100 110 120 130 0 200 400 600 800 1000 1200 1400 30? 60? 90? 120? 180? conduction angle st1230c..k series (single side cooled) r (dc) = 0.042 k/w thj-hs maximum allowable heatsink temperature (c) average on-state current (a) 20 30 40 50 60 70 80 90 100 110 120 130 0 400 800 1200 1600 2000 dc 30? 60? 90? 120? 180? conduction period st1230c..k series (single side cooled) r (dc) = 0.042 k/w thj-hs average on-state current (a) maximum allowable heatsink temperature (c) 30 40 50 60 70 80 90 100 110 120 130 0 500 1000 1500 2000 2500 30? 60? 90? 120? 180? conduction angle st1230c..k series (double side cooled) r (dc) = 0.021 k/w thj-hs average on-state current (a) maximum allowable heatsink temperature (c) 20 30 40 50 60 70 80 90 100 110 120 130 0 500 1000 1500 2000 2500 3000 3500 dc 30? 60? 90? 120? 180? conduction period st1230c..k series (double side cooled) r (dc) = 0.021 k/w thj-hs average on-state current (a) maximum average on-state power loss (w) 0 500 1000 1500 2000 2500 3000 3500 4000 0 400 800 1200 1600 2000 2400 180? 120? 90? 60? 30? rms limit conduction angle st1230c..k series t = 125?c j average on-state current (a) maximum average on-state power loss (w) 0 1000 2000 3000 4000 5000 0 500 1000 1500 2000 2500 3000 3500 dc 180? 120? 90? 60? 30? rms limit conduction period st1230c..k series t = 125?c j
document number: 94395 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 11-aug-08 5 st1230c..kp series phase control thyristors (hockey puk version), 1745 a vishay high power products fig. 7 - maximum non-repetitive surge current single and double side cooled fig. 8 - maximum non- repetitive surge current single and double side cooled fig. 9 - on-state voltage drop characteristics fig. 10 - thermal impedance z thj-hs characteristics number of equal amplitude half cycle current pulses (n) peak half sine wave on-state current (a) 14000 16000 18000 20000 22000 24000 26000 28000 30000 110100 st1230c..k series initial t = 125?c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j at any rated load condition and with rated v applied following surge. rrm pulse train duration (s) peak half sine wave on-state current (a) 12000 14000 16000 18000 20000 22000 24000 26000 28000 30000 32000 34000 0.01 0.1 1 maximum non repetitive surge current versus pulse train duration. control of conduction may not be maintained. st1230c..k series initial t = 125?c no voltage reapplied rated v reapplied rrm j instantaneous on-state voltage (v) instantaneous on-state current (a) 100 1000 10000 0.5 1 1.5 2 2.5 3 t = 25?c j st1230c..k series t = 125?c j square wave pulse duration (s) transient thermal impedance z (k/w) thj-hs 0.001 0.01 0.1 0.001 0.01 0.1 1 10 100 st1230c..k series steady state value r = 0.042 k/w (single side cooled) r = 0.021 k/w (double side cooled) (dc operation) thj-hs thj-hs
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 94395 6 revision: 11-aug-08 st1230c..kp series vishay high power products phase control thyristors (hockey puk version), 1745 a fig. 11 - gate characteristics ordering information table instantaneous gate current (a) instantaneous gate voltage (v) 0.1 1 10 100 0.001 0.01 0.1 1 10 100 vgd igd (b) (a) tj=25 ?c tj=125 ?c tj=-40 ? c (1) (2) (3) (1) pgm = 16w, tp = 4ms (2) pgm = 30w, tp = 2ms (3) pgm = 60w, tp = 1ms a) recommended load line for b) recommended load line for <=30% rated di/dt : 10v, 10ohms frequency limited by pg(av) rated di/dt : 20v, 10ohms; tr<=1 s tr<=1 s device: st1230c..k series rectangular gate pulse 1 - thyristor 2 - essential part number 3 - 0 = converter grade 4 9 - lead (pb)-free - c = ceramic puk 8 - critical dv/dt: 5 - voltage code x 100 = v rrm (see voltage ratings table) 6 - k = puk case a-24 (k-puk) 7 - 0 = eyelet terminals (gate and auxiliary cathode unsoldered leads) 1 = fast-on terminals (gate and auxiliary cathode unsoldered leads) 2 = eyelet terminals (gate and auxiliary cathode soldered leads) 3 = fast-on terminals (gate and auxiliary cathode soldered leads) none = 500 v/s (standard selection) l = 1000 v/s (special selection) device code 5 1 3 24 6789 st 123 0 c 16 k 1 - p links to related documents dimensions http://www.vishay.com/doc?95081
document number: 95081 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 02-aug-07 1 a-24 (k-puk) outline dimensions vishay semiconductors dimensions in millimeters (inches) 74.5 (2.9) dia. max. 2 holes dia. 3.5 (0.14) x 2.1 (0.1) deep 4.75 (0.2) nom. 44 (1.73) creepage distance: 28.88 (1.137) minimum strike distance: 17.99 (0.708) minimum quote between upper and lower pole pieces has to be considered after application of mounting force (see thermal and mechanical specification) 20 5 pin receptable amp. 60598-1 1 (0.04) min. 2 places 47.5 (1.87) dia. max. 2 places 27.5 (1.08) max. 67 (2.6) dia. max.
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
